Welcome to the official website of Tai'an Huisen Mechanical and Electrical Technology Co., LTD!Service Phone:0086-0538-5058777

Gypsum Equipment Manufacturers

To build the first brand gypsum equipment

Linear Phone Service:

+86-13953837267

Contact Us
Service Hotline:
+86-0538-5058777

Add: 26F of Tianlong Building A, No.96 Great Wall Road, Tai'an, Shandong,China
Tel: 86-538-6306577 5058777
Fax: 86-538-6307077
Hot Line:13953837267
E-mail: am@tahuisen.com
Website:
www.tahuisen.com

Current Location:Home Page » Product Center
Related:Our gypsum board production line applies international up-to-date equipment, such as full-automatic batching system, plate type forming system, auto edge-adjusting, fixed length cutting, turnover transverse conveyor, transverse dryer, prevent folding device, fully automatic wrapping and booking device, auto packing system and so on. The batching system achieved fool-operation of 20 kinds of power and slurry, and our production line can adjust metering and adding of each main and auxiliary material automatically according to the forming speed. In order to keep with the most advanced international production equipment, in recent years, we have introduced hard edge and surface mixer and transverse wind dryer, absorbed their technology, made a prototype and debugged successfully. And it has been applied in the production line exported to the United States and Mexico. Besides, learn from the technology of United States, we had gained a success in testing natural gas direct-fired drying technology in the production line eith annual production capacity of 15 million square meters for Italian Gessi del Lago d'lseo Spa Company. To improve the thermal sfficiency of the dryer, all of our production lines produced after 2006 adopting surplus heat recovery technology and contributed to the energy saving and enviromental protection.
Related:Chemical Gypsum(desulfurization gypsum, phosphorous gypsum, lemon gypsum, fluorine gypsum, titanium gypsum, ect.) is one of the main raw materials of gypsum building material in a long time from now and also is the major project in researching and developing process and equipment of our company in recent years. After nearly three years' technology reserve and more than 20 engineering examples' construction practice, with the improving of processing technology and equipment technology, the total output of our accomplished production lines have reached to 3.5 million tons. We are in the forefront in the same industry in domestic.
Related:The gypsum powder production line of which the material is natural gypsum, are equipped with many advanced technological equipment in domestic and foreign such as material averaging device, double-grade crushing system, plate type conveyor, vertical mill, ramon mill, gypsum boiling kiln, cooling machine and waste heat recycling system,ect.The boiling kiln is widely used in our nation with the advantages of small, simple, great output, small occupied area, easy control, perfect gypsum microstructure, stable physical properties and low running cost. It has been sold to Thailand, Uzbekistan, Columbia and Mexico along with our production line. At present, our company provide many types of production lines with production capacity from 3t/h to 100t/h and also can design prosuction lines of different production process according to different customers' conditions. We can offer a basket of services of design, producing, installation, commissioning and training, as well as turnkey project for customers.
Related:Gypsum block production line is new type equipment developed by our company. The mould cavity uses stainless steel plating with chrome and has polishing treatment, its surface finish is up to 0.1μm, and its dimension precision is up to 0.05mm; the mixer also uses stainless steel and is equipped with washing device, never sticky; the space clamp uses imported super-thin air cylinder avoiding damage of the block;
Related:According to my company many years of experience in the production of gypsum building materials and equipment, developed a fully automated paperless gypsum board production line, the production line of automatic batching, automatically add mesh, automatic cut length, automatic trimming, mechanization adjust the width length and thickness, multilayer shop slurry technology, automatic stacking, and supporting the lateral air drying system, automatic production line, its production thickness from 6mm to 200mm adjustable width from 600mm to 1250mm adjustable length from 1200mm to 3600mm adjustable . The successful development of the production line, to fill the gap, for domestic and international promotion of paperless gypsum board equipment and equipment to lay the foundation has played a role.
Related:Domestic PVC plywood production line, mostly semi-manual and semi-mechanization-based, labor-intensive existence, the yield at the end, small production, many shortcomings and poor working environment, a company based on their own experience and learn from Taiwan's technology, developed a whole creative automatic production line, the production line from the beginning to the end plates are to achieve automatic palletizing wrapping words, with an annual output of more than 3 million square meters of production line only 2-man operation, greatly improve labor productivity and reduce production costs. The product line includes automatic plate mechanism (forklift driver only become stack of plasterboard into the plate placed on the device), automatic adjustment device, double-sided touch machine, lamination machine, cutting machine, edge banding machine, a small stack stacking machine , thermal machine, a large stack stacking machine, winding machine and other components.
Related:Our company currently can provide two kinds of processing way in the phosphorous gypsum production line: one is low temperature slow calcining in drying process; the other is low temperature slow calcining in calcining process. They are all use gypsum boiling kiln as core equipment and set process ways according to different capacity and usage, and are consist of raw material feeding section, drying section, calcining section, cooling section(optional), modified polisher section and finished products transporting, packing and storing section.
Related:Our company can provide using hydrothermal way which can use many kinds of fuel like coal, natural gas, diesel oil and heavy oil. It also can be applied to all kinds of high-quality gypsum materials like natural gypsum and industrial byproduct gypsum. The annual capacity reaches from 2,000 tons to 300,000 tons. The production process:(In the process below, in order to integrating the production process of natural gypsum and industrial byproduct gypsum, we omit the crushing and milling section of the natural gypsum from ore to powder and start directly from powder material.)
Related:Gypsum board packaging line
Related:According to the use, the painted gypsum is sorted into surface painted gypsum(F), bottom painted gypsum(B), temperature-insulation gypsum(T) and gypsum based self-leveling floor compound. We can provide various kinds of continuous type painted gypsum production line equipment and process formula using hydrated gypsum and anhydrous gypsum mixed with many kinds of additives as materials. At present we can provide production lines with annual capacity from 5,000 tons to 500,000 tons.
Add of Headquater:26F of Tianlong Building A, No.96 Great Wall Road, Tai'an, Shandong
Add of Factory: Middle of No.1 Road of High-Tech Zone, Tai'an, Shandong

Fax:+0086-0538-6307077 Phone:+0086-0538-5058777 Email:am@tahuisen.com
Copyright 2015-2016 Tai'an Huisen Mechanical and Electrical Technology Co., LTD.All rights reserved.

Global Service Hotline

+86-0538-5058777